News and events

Latest news from the DDX world

Online Training 2025 | EasySTONE and EasySTONE NC

DDX STONE TRAINING: ANYTIME, ANYWHERE

For the first time, DDX Software Solutions offers a calendar organized into 6 cycles of online lessons on EasySTONE and EasySTONE NC, our CAD/CAM software for stone cutting and processing. 

This educational program is a unique opportunity. Each participant will have the chance to learn to work independently and make the most of the DDX solutions’ features.

 

2025 CALENDAR


Below, you can find the course dates:

 

  • From February 3rd to March 6th
  • From March 17th to April 17th
  • From May 6th to June 6th
  • From June 22nd to July 24th
  • From September 29th to October 30th
  • From November 10th to December 12th

Here the calendar with the dates of the first cycle of lessons, from February, 3rd to March, 6th.

 

LESSON PROGRAM

The course is divided into a total of 18 lessons, each lasting approximately 30-60 minutes depending on the topic.

 

  • 2D Drawing and Processing (four lessons)
  • 3-Axis Surface Drawing and Processing (three lessons)
  • 5-Axis Surface Drawing and Processing (one lesson)
  • EasySTONE NC (two lessons)
  • Lathe (one lesson)
  • DDXPhoto with EasySTONE NC (one lesson)
  • Nesting and Segmentation (two lessons)
  • Automatic CAM (one lesson)
  • DDXPhoto with EasySTONE (one lesson)
  • Waterjet (two lessons)

The course is available for free or for a fee, depending on the existing support contract. Lessons are available in both Italian and English and will begin at 10:00 AM. The English course is accessible in 3 time zones: CET, EDT, and AEST.

To allow all participants to follow lessons based on their needs, we’ve decided to repeat the course throughout the year. Each cycle will cover the same topics: if you can’t attend the February session, you can still sign up for the March session or later ones.

You will have access to the course for three months; however, the videos cannot be downloaded.

Registrations are open all year: upon registering, you will be included in the next available lesson cycle.

SIGN UP NOW

 

PRACTICAL DETAILS


FREE OPTION: The course is free for all customers with an active support contract and for those who wish to activate one.

Would you like to check if you have an active support contract?
CONTACT US

 

PAID OPTION: The course can be purchased in one payment for €350.00 + VAT, payable by credit card.

Would you like to sign up and proceed with payment?
CONTACT US

 

RESELLERS/BUILDERS: The course is free for our partners.

RESELLER/BUILDER REGISTRATION

 

ACCESS METHOD: Once registered, either free or paid, you will receive a link with the full schedule. You will be able to access the lessons when the corresponding link is active.


Do you need more information? Write to us at customercare@ddxgroup.com

Online Training 2025 | EasySTONE and EasySTONE NC

DDX STONE TRAINING: ANYTIME, ANYWHERE

For the first time, DDX Software Solutions offers a calendar organized into 6 cycles of online lessons on EasySTONE and EasySTONE NC, our CAD/CAM software for stone cutting and processing. 

This educational program is a unique opportunity. Each participant will have the chance to learn to work independently and make the most of the DDX solutions’ features.

 

2025 CALENDAR


Below, you can find the course dates:

 

  • From February 3rd to March 6th
  • From March 17th to April 17th
  • From May 6th to June 6th
  • From June 22nd to July 24th
  • From September 29th to October 30th
  • From November 10th to December 12th

Here the calendar with the dates of the first cycle of lessons, from February, 3rd to March, 6th.

 

LESSON PROGRAM

The course is divided into a total of 18 lessons, each lasting approximately 30-60 minutes depending on the topic.

 

  • 2D Drawing and Processing (four lessons)
  • 3-Axis Surface Drawing and Processing (three lessons)
  • 5-Axis Surface Drawing and Processing (one lesson)
  • EasySTONE NC (two lessons)
  • Lathe (one lesson)
  • DDXPhoto with EasySTONE NC (one lesson)
  • Nesting and Segmentation (two lessons)
  • Automatic CAM (one lesson)
  • DDXPhoto with EasySTONE (one lesson)
  • Waterjet (two lessons)

The course is available for free or for a fee, depending on the existing support contract. Lessons are available in both Italian and English and will begin at 10:00 AM. The English course is accessible in 3 time zones: CET, EDT, and AEST.

To allow all participants to follow lessons based on their needs, we’ve decided to repeat the course throughout the year. Each cycle will cover the same topics: if you can’t attend the February session, you can still sign up for the March session or later ones.

You will have access to the course for three months; however, the videos cannot be downloaded.

Registrations are open all year: upon registering, you will be included in the next available lesson cycle.

SIGN UP NOW

 

PRACTICAL DETAILS


FREE OPTION: The course is free for all customers with an active support contract and for those who wish to activate one.

Would you like to check if you have an active support contract?
CONTACT US

 

PAID OPTION: The course can be purchased in one payment for €350.00 + VAT, payable by credit card.

Would you like to sign up and proceed with payment?
CONTACT US

 

RESELLERS/BUILDERS: The course is free for our partners.

RESELLER/BUILDER REGISTRATION

 

ACCESS METHOD: Once registered, either free or paid, you will receive a link with the full schedule. You will be able to access the lessons when the corresponding link is active.


Do you need more information? Write to us at customercare@ddxgroup.com

Show Error
Show Success Show Success Show Error Show Error